A Step-by-Step Process of How Braces Work
Having crooked or crowded teeth can ruin your smile, but more important, it can change the bite pattern and even be painful in some instances. Anyone who is suffering from this problem needs to correct it as soon as possible. One of the best orthodontic treatments to correct misaligned jaw or crooked teeth is with the help of braces. Braces are most commonly used during adolescence; however, people still get braces during adulthood.
Most braces are made of metal or ceramic; conversely, wires and bonding material are used to attach them to your teeth. The success rate of any orthodontic treatment depends on the age of the patient. If you are willing to undergo this procedure, you should visit a dental office Phoenix, AZ. The entire procedure of how braces work is a bit complicated. So, let’s discuss it in full detail.
Types of Braces
There are various types of braces, and the dentist near Phoenix, AZ, will recommend a certain type of braces depending on various factors. It can include things like age, whether the individual has an overbite, or to what extent the teeth are crooked. The dental office Phoenix, AZ makes custom-made braces according to each individual’s needs.
Traditional braces are made of metal brackets are that bonded to each tooth. An archwire then puts pressure on the teeth to bring them into the right position. This is a gradual process, and once the teeth are in the right position, the dentist near Phoenix, AZ, can remove the braces. Other braces that can be used are clear ceramic braces which are much less visible. Next, we have lingual braces that sit behind your teeth, so they are not at all visible. Aligner trays can also be used, which can be taken off and put back on whenever you want.
How do Braces work?
The way these braces work is that they move your teeth in position by applying pressure on the teeth for an extended period. Over time, the jaw starts to adapt to the pressure and conform according to it. If you are having problems with your teeth, you can visit an emergency dental Phoenix, and they can have a closer look. When we talk about the entire procedure of installing braces, people think that since the teeth are attached to the jawbone, they are impossible to move. However, this is not the case.
Instead, the roots of the teeth are surrounded by a membrane and it is the job of this membrane to control the position of your teeth. So, when pressure is applied to the membrane, it complies and shifts the position of the teeth. Getting braces doesn’t hurt during the appointment; however, you will start to feel some soreness after a few days.
Once the emergency dental Phoenix has cleaned your teeth, brackets are applied to the teeth using glue. The brackets can be made of either stainless steel, plastic, or ceramic. Once the brackets are applied, you might feel a little discomfort but no pain. The brackets apply even pressure to the teeth using wires made from copper titanium, stainless steel, or nickel titanium. Next are elastic bands called O-rings. They are placed around the brackets to put additional pressure on your jaw.
During the procedure, the dentist will place a spacer at the back of your mouth to push the jaw forward and make space for the braces. It is important to note that not every patient will need spacers, and they are only used when the brackets don’t fit properly. Then come archwires. They are used to connect the brackets on your teeth. It is with the help of archwires that pressure is applied to the teeth.
Another integral part of the braces mechanism is the buccal tubes. They are metal tubes that are attached to one of the molars. The dentist uses the buccal tubes to tighten or loosen different parts of the braces. Next come coil springs that can be placed on the archwire to apply more pressure between two teeth to push them apart. The entire process can take a couple of hours.